1. Use Com-Port to establish communication connection between the device and PC;

2. Open the software and double-click the device connected through the Com-Port.

3. Click the Information button, the screen will display the device parameter configuration information;

Enter IP = XXX.XXX.xxx. XXX(IP address) XXXX(port number) and press Enter. Default port number: 23

5. Enter Gateway = XXX.XXX.xxx. XXX and press Enter.

6. Enter Netmask = XXX.xxx.xxx. XXX and press Enter.

7. Enter DNS = XXX.XXX.xxx. XXX and press Enter.

8. In the Command Line command line, enter DHCP=OFF and press Enter.

9. In the Command Line, enter SAVE and press Enter.

10. Enter REBOOT in the Command Line command line and press Enter.