HG1011 XPON HGU 1GE+CATV
Product introduction :HG1011 is a residential gateway device with routing functions for XPON ONU and LAN Switch for residential and SOHO users, which is in line with ITU-T G.984 and IEEE802.3ah. The uplink of HG1011 provides one PON interface, while downlink provides one Ethernet and RF interface. It can realize optical access solutions such as FTTH (Fiber To The Home) and FTTB (Fiber To The Building). It fully integrates the reliability, maintainability and security design of carrier-grade equipment, and provides customers with the last kilometer of broadband access to residential and corporate customers.
Features:
Compliance with IEEE 802.3ah(EPON) & ITU-T G.984.x(GPON) standard
Support IPV4 & IPV6 Management and transmission
Support TR-069 remote configuration and maintenance
Support Layer 3 gateway with hardware NAT
Support Multiple WAN with Route/Bridge mode
Support Layer 2 802.1Q VLAN, 802.1P QoS, ACL etc
Support IGMP V2 and MLD proxy/ snooping
Support DDSN, ALG, DMZ, Firewall and UPNP service
Support CATV interface for video service
Support bi-directional FEC
Highlights:
Support docking compatibility with OLT of various manufacturers
Support automatically adapt to the EPON or GPON mode used by the peer OLT
Support multiple wan configuration
Support WAN PPPoE/DHCP/Static IP/Bridge mode.
Support CATV video service
Support fast transmission of hardware NAT
Hardware Specifications:
interface: 1* G/EPON+1*GE+1*RF
Power adapter input: 100V-240V AC, 50Hz-60Hz
Power Supply: DC 12V/1A
Indicator light: POWER/PON/LOS/LAN1/ /RF/OPT
Button: Power switch Button, Reset Button
Power Consumption: <18W
Working temperature: -20℃~+55℃
Environment humidity: 5% ~ 95% (non-condensing)
Dimension:157mm x 86mm x 28mm (L×W×H Without antenna)
Net Weight:0.15Kg
PON Interface:
Interface Type: SC/APC, CLASS B+
Transmission distance: 0~20km
Working wavelength: Up 1310nm; Down 1490nm;CATV 1550nm
RX Optical power sensitivity: -27dBm
Transmission rate: GPON: Up 1.244Gbps;Down 2.488Gbps EPON: Up 1.244Gbps;Down 1.244Gbps
Ethernet Interface :
Interface type:1* RJ45
Interface parameters: 10/100/1000BASE-T